36v 10ah Lithium ion battery or 42v 3 amp Charger
. Its lithium Ion battery with Charge protection with BMS. Its High power, high Back Up facility. You can use this battery in your 250 watts motor, 350 watts motor easily. This battery is protected with BMS connection. Means battery is with over charge protection. Low discharge protection. This battery weight is very low than your normal lead acid battery. And can provide approriate Power to your Motor. This Battery provides a lifespan of max 3 years.
Use only lithium Ion charger for this battery. Do not use Lead acid Battery Charger.
Dimensions -
Length x Width x Height = 20 x 10 x 7cm
Weight = 2.5 kg
Battery Specification -
Discharge Wire and charging wire is 1.5 sqmm thick. Same port for Charging and discharging.
Single Cell Used - BAK 2550 mah 3C EV Grade Battery
Charge Cycle with full Capacity - 1000~1200 aprox
BMS Specification - 10s20A, Heat Sink protection
Maximum Capacity - 10.4 AH or 10400 mah
Max discharge current - 20A
Battery Voltage - 36v
Charging Specification -
Charger Voltage- 42v
Charger Current – Within 2 to 10 amps
CHARGER -:
- Excellent Quality
- Short Circuit, Over Voltage & Over Current Protection
- Incredibly Low Fault Rates
- No Minimum Load
- This power supply is a regulated Center Positive power supply
- It's plug design is for Indian power socket so, no plug converter is required
- Compact size & light weight
- High Reliability
- Regulated Stable Voltage
- Good quality SMPS Based Adapter
- Stabilized Output, low ripple & low interference
- Single Output Voltage
- High Efficiency & low energy consumption